AMSEC ESL20XL

Has your current ESL 20 keypad failed? Remove your old keypad and plug this new digital keypad in your lock to open your safe. Your old code is stored on the inside components and will still work.

Note: Installation should be performed by a certified safe locksmith or warranty will be void.

Features:

• Replaces most mechanical combination locks. Easy installation and operation.
• UL Listed Type 1 digital electronic lock
• 9 user code (1 Master user and 8 regular users)
• Two 9V-DC batteries in the keypad housing can be changed easily
• Sealed electronics to prevent possible moisture related failures
• Audible beep and flash from every keystroke for maximum feedback to the user
• Soft Touch membrane keypad is rugged but requires very low activation pressure
• 15 minute Penalty Lockout after four incorrect entries
• Dead-latched lock design with an internal relock device for maximum security
• Lock "auto-locks" when boltwork is thrown to prevent safes from being left open
• Optional internal battery pack extends operation between battery changes.
• Standard map black finish

Additional Features:

• Time Delay Mode: Delays can be set from 1 to 99 minutes. Open period can be set from 1 to 9 minutes.
• Multiple User Mode: When enabled, one Master code and eight user codes are available with full supervisory control and code management.
• Dual Control Mode: When enabled, the lock requires two combinations to open for added security.
• Armored Car Override: When enabled, allows an armored car service to bypass Time Delay.

Note: If upgrading from a dial lock to this electronic lock, the connector on the cable must be cut and recrimped to pass through the hole.

ESL5 Operating Instructions

ESL20 Brochure